Home > Knowledge > Content

Six Surface Treatments for Stainless Steel Glass Fittings

Aug 31, 2022


In order to improve the aesthetics of stainless steel glass fittings, we process the stainless steel surface to present a better appearance and effect, when manufacturing products. Each customer can choose the processing technology, according to their own needs and budget.

Below, we briefly introduce six surface treatment processes.


1. Mirror Finish Surface Treatment

Mirror finish, simply speaking, is the polishing on the stainless steel glass fittings surface. The polishing methods are divided into physical polishing and chemical polishing. At the same time, you can also choose to partially polish the stainless steel surface. The level of polishing is divided into the following effects, including ordinary polishing, ordinary 6K polishing, fine grinding 8K polishing, super fine grinding 10K polishing. The mirror finish effect gives a simple, stylish and high-end feeling.

2. Sandblasting Surface Treatment

This is a very common surface treatment process. It is powered by compressing air.  The material is sprayed on the workpiece surface through high-speed spraying. Such an operation causes the outer surface to undergo a shape change. Sandblasting works very well, especially in increasing the viscosity of the bonded part, optimizing the surface burr of machined parts, decontamination, and the matte surface finish. This process is much better than hand sanding. The sandblasted stainless steel surface has a uniform structure. It creates the low profile, durable character. Moreover, the processing efficiency is very high. Manual sanding can produce rough surfaces, but the speed is too slow. Cleaning the surface with chemical solvents will make the surface too smooth for coating adhesion.

3. Chemical Surface Treatment

This process mainly adopts the principle of combining chemical process and electrochemical process, to generate a layer of stable compounds on the surface of stainless steel glass fittings. For example, electroplating, which is common in our lives, is a type of chemical treatment.

Chemical treatment mainly relies on single or mixed acid solution, cation solution, etc. to remove rust. After that, a protective film is formed on the metal surface by chromate treatment, phosphate treatment, anodization, blackening and other methods. This process is mainly used to produce complex pattern effects.

4. Surface Coloring Process

The surface coloring process can bring different colors to the surface of stainless steel glass fittings. This makes metal surfaces more colorful. The surface coloring process not only enriches its appearance. Moreover, it can also effectively improve the wear resistance and corrosion resistance. Commonly used surface coloring methods include chemical coloring method, electrochemical oxidation coloring method, ion deposition oxide coloring method, high temperature oxidation coloring method and gas phase cracking coloring method, etc.

5. Wire Drawing Surface Treatment Process

The metal wire drawing surface treatment is a very common decoration method in life. Using this process, you can create straight, threaded, corrugated, chaotic and swirl textures on the stainless steel glass fitting surface. This surface treatment process adds the characteristics of good hand feeling, fine gloss and strong wear resistance to the metal surface. Most customers choose this process, when buying stainless steel fittings for electronic equipment industry, home appliances industry, mechanical equipment industry and other industries.

6. Spraying Surface Treatment

Stainless steel surface spraying is substantially different from the above mentioned surface coloring treatment. Due to different materials, some spray paints may destroy the oxide layer on the stainless steel surface. However, sometimes a simple spray process can achieve different color effects. In addition, you can also use different spraying processes to change the surface feel.


Send Inquiry